How to clean the crystal: 10 methods, as well as charging and activation tips

Many people use crystals to soothe their mind, body and soul. Some people believe that crystals act energetically, transmitting natural vibrations to the world.
Before buying, crystals usually travel a long distance from the source to the seller. Each transition exposes the gemstone to energy that may be misaligned with yourself.
And it is said that these stones will absorb or change the negative charge you want to release when they are cured.
Read on to learn about some of the most common cleaning methods, how to align the crystal with your intentions and more.
It is said that water can offset any negative energy stored in the stone and return it to the earth. Although it is best to use natural running water (such as a stream), you can also wash the stones under the tap.
If you are near the ocean, consider collecting a bowl of fresh brine. Otherwise, mix a tablespoon of sea, rock or table salt into a bowl of water.
Make sure your stone is completely submerged and let it soak for several hours to several days. Rinse and pat dry when finished.
Do not use it for: malachite, selenite, calcite, calcite, lepidolite and angel stone that are soft, porous or contain trace metals
This method can also be used to derive negative values ​​in a safe and closed environment. This is especially beneficial for protective gemstones such as black tourmaline.
To do this, put dry brown rice in a bowl, and then bury the stone under the grain. It is said that after the rice has absorbed the energy you want to eliminate, please dispose of the rice immediately after cleaning.
Although ritual cleaning usually focuses on certain points in the solar or lunar cycle, you can place stones at any time for cleaning and charging.
Put your stone before nightfall and plan to put it in before 11 am. This will bathe your stone in the moon and sunlight.
Prolonged exposure to direct sunlight may corrode the surface of the stone, so make sure you come back in the morning.
If possible, put the stone directly on the ground. This will allow for further cleaning. No matter where you are, please make sure that you will not be disturbed by wildlife or passersby.
Do not use it for: Vibrant stones in the sun, such as amethyst; soft stones, such as lapis lazuli, rock salt and selenite, which may be damaged by bad weather
Sage is a sacred plant with many healing properties. It is said that soiling the stone can eliminate discordant vibrations and restore its natural energy.
If you can’t get dirty outdoors, make sure you are near an open window. This will disperse the smoke and negative energy.
When you are ready, light the tip of the sage with a flame. Transfer the sage to your preferred hand, firmly grasp the stone, and move it through the smoke.
Let the smoke wrap the stone for about 30 seconds. If it has been a while since the last cleaning-or you feel the stone is sticking a lot-consider applying it for another 30 seconds.
The sound recovery function can flush a single pitch or tone on an area, making it the same vibration as the tone.
This can be achieved through chanting, singing bowls, tuning forks or even beautiful bells. The key to the sound is not important, as long as the sound is loud enough for the vibration to completely cover the gem.
This method is an ideal choice for collectors who have a large number of crystals and are not easy to inventory or transfer.
Large quartz clusters, amethyst spar and selenite slabs can be used as good tools for removing smaller stones.
Place your stones directly in or on these stones. It is believed that larger rock vibrations will eliminate the discordant energy found in stationary stones.
Since these gems are usually small, you may need to prepare multiple gems to successfully clear other gems.
First, please hold on to the dominant stone. Focus on your intentions for a while and take a deep breath.
Bring the stone close to your face, then exhale through your nose and forcefully, then exhale onto the stone to achieve maximum vibration.
Although this is considered the safest way to remove stones, it can be intimidating for some people. The more you adjust your self-awareness, the easier it is to shift your energy to the stone to be restored.
Take a few minutes to land and concentrate your energy, then pick up the stone and see your hand vividly with the hand radiating white light.
See this light surrounding the stone and feel it getting brighter and brighter in your hand. It is assumed that impurities will rush out of the stone, making the stone shine in a new purpose.
Although crystals are said to have innate healing properties, taking the time to set an intention for the gem can help you stay in touch with the gem and restore your sense of purpose.
You may feel very comfortable when you meditate or place it on the third eye. You can also lie back and place the stone on the corresponding chakra or body part you want to use.
Imagine that the energy of the stone merges with your own energy. Talk to the stone silently or verbally, and seek assistance to complete the current job.
If your stone feels heavier than expected (like losing its luster), you may benefit from some vibrant activation.
Try to release energy by speaking, singing, or breathing to release your own energy. A little interaction can go a long way!
If you have an outdoor plan, please consider bringing stones with you. Many people find that allowing stones to absorb natural energy in a park or beach has a powerful effect.
You can also create an activation grid by enclosing vibrant counterparts around gems. The most popular choices include ruby, clear quartz, apatite, kyanite, selenite and ruby.
You can use any stone that is attracted. Just make sure that they completely surround the main crystal so that it can fully absorb its vibration.
The more you use the stone, the more energy it collects. A good rule of thumb is to remove all stones at least once a month.
If a single stone feels heavier than usual, please continue cleaning. You don’t have to wait the specified time between cleanings.
Find a way to resonate with you and your practice. The method that works best for you may not work for others, so pay attention to the right feeling.
Look for an intimate place to keep your stone. If possible, place them near windows or plants so that they can absorb this natural healing energy. Otherwise, please place the stone around the house, office or other space according to your intentions.
When we take care of our own crystals, we take care of ourselves. We allow energies that are at odds with our lives and intentions to leave in a peaceful and healing way.
Taking these small measures makes us more cautious in our interactions with gems, with ourselves and with others.
Can crystals and stones really help you relieve anxiety? This may be a placebo effect, but hey-if it works, it works. Healing crystals, relieve stress.
The manufacturers of Himalayan salt lamps claim that they release useful negative ions into the room and clean the air. But do they really work?
To avoid the side effects and possible toxicity of the medicine, you can switch to natural painkillers. Check out these five surprising options.
Hypnosis is a true psychotherapy process. It puts you into a state to make it easier for you to receive treatment…
When your Throat Chakra is blocked or misaligned, your creativity and communication skills may be problematic. Throat chakra problems can also cause…
If you want to work with providers through a holistic approach, you can choose a holistic doctor. They can suggest alternative treatments for you…
Burning candles will release chemicals, but will they harm your health? This is what the scientific community thinks about which candle is the healthiest.
Wintergreen oil (or wintergreen oil) has a lot in common with the active ingredients in aspirin. Read about its purpose, find information about tips…
Prolotherapy is an alternative therapy that can help relieve pain and repair body tissues, for example, people with osteoarthritis. However, not all experts…


Post time: Dec-19-2020